Loading Media
Check www.minolta-qms.com/support (click on
Answer Base) for currently approved media. To order
approved media, go to www.q-shop.com.
How do I prepare and load the media?
Preparing the Media
5 "
Don't unwrap the paper above the
printer, as this might cause paper
particles to fall into the printer. Don't
fan large quantities of transparency
media.
1
Take off the top and bottom sheets of a ream of paper.
2
Holding a stack of approximately 500 sheets at a time, fan the stack to
prevent static buildup in the paper before inserting it in a tray.
Loading and Printing Media
Refilling an Upper or Optional Media Tray
5 "
The illustrations show a standard upper media tray; however,
instructions are the same for a high-capacity input feeder media tray.
Attention
Except for transparencies, do not mix media of different sizes, types, or
weights in the same tray, as this will cause printer jamming.
42
Loading Media