Do not use transparencies that
„
Are coated, such as transparencies designed for most color printers
„
Have static electricity that will cause them to stick together
Use transparencies that are
„
Monochrome, uncoated transparencies (also known as OHP film)
5 "
General Notes about Media
Load the media face-up with its top toward the back of the printer.
Often, an arrow on the media package label indicates the printing-side of the
media. If you can't remember which side of the media to print on, remove the
media from the tray, rotate the stack 180°, turn the stack over, and then place
it back in the tray.
Attention
Do not allow media to go above the fill limit mark inside the tray or the
media may not be fed correctly.
Media Trays
Tray
Location
Upper
Multipurpose
HCIF
Notes
28
Refer to page 40 for information about the recommended
Q-Media.
Media Tray
Upper (standard) tray—Tray 2
Multipurpose—Tray 1
High-capacity Input Feeder (HCIF)
(optional)—Trays 5 and 6
You may rename these trays for your convenience. See the
CrownBooks in PDF on the Software Utilities CD-ROM for
more information.
Media Storage and Handling
Sheet Capacity
for Letter/A4-
sized Media
500
100
1,000 (2 x 500)