Minolta MAGICOLOR 3100 User Manual page 21

9
Remove the black protective sheet.
Attention
Do not touch black transfer rollers. They are extremely sensitive to
hand oils and scratches, both of which reduce print quality. This
type of damage is not covered by the product warranty.
10
Close the covers c, d.
11
Turn on the printer.
5 "
You do not need to reset the
consumables usage monitor-
ing system when you replace
an imaging unit.
After approximately 6 minutes warmup (assuming normal temperature
and humidity), your printer prints a startup page and displays " IDLE " on
the message window.
This 6-minute warmup only happens when a new imaging unit has been
installed. Normal time to warm up is approximately 1½ minutes.
Replacing the Imaging Unit
15