Minolta MAGICOLOR 3100 User Manual page 93

Symptom
Nothing is
printed.
Solving Problems
Cause
There is a Keypad
Locked, a media
jam, or other
message on the
control panel.
The driver is not set
correctly.
The imaging unit is
old or damaged.
The media is moist
from humidity.
The AC outlet's
voltage or
frequency that does
not match the
printer
specifications.
Several sheets are
being fed at the
same time.
Media is not set
properly in the
media tray(s).
Media is jammed
inside the printer.
There is not enough
memory or your PS
Wait Timeout is
incorrect to print
directly from PDF.
Solution
Handle according to the message
displayed. For example, if the keypad is
locked, check to see if the printer's in
Network Mode and someone else has
opened a telnet session to it.
Select the proper driver media setting.
Remove the imaging unit and check for
damage. If necessary, replace it.
Adjust the humidity for paper storage.
Remove the moist media and replace it
with new, dry media.
Use a power source with the proper
specifications.
Remove the media from the tray and
check for static electricity. Fan plain
paper and other media (but do not fan
large amounts of transparencies), and
replace it in the tray.
Remove the media, tap it to straighten it
out, return it to the media tray, and realign
the media guides.
Remove any jammed media from the
printer.
Increase your memory and the PS Wait
Timeout. See "PDF File Printing" on page
65.
87