Internal IDE Hard Disk Drive
Attention
Make sure that the printer and all accessories are turned off before
installing accessories involving the controller board.
One optional internal IDE hard disk is supported.
5 "
Direct printing of complex or large PDF files may require additional
memory and/or a hard disk.
What ' s in the Kit?
The internal IDE hard disk drive kit includes
the following:
„
IDE hard disk with ribbon cable attached
„
IDE hard disk bracket
„
4 screws
Installation
Attention
It's very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 113. In addition,
always handle circuit boards by the edges only.
When installing or removing a hard disk, make sure that the metal
support posts (on the hard disk) do not come in contact with any of the
electrical leads on the chips mounted on the controller board. The
controller board will not function if any of the leads are broken or
shorted together.
132
Internal IDE Hard Disk Drive