Service Messages - Minolta MAGICOLOR 3100 User Manual

Service Messages

A service message sometimes occurs as a result of an unusual combination
of events, not because of an actual problem. When the printer stops and a
service message displays in the message window, turn the printer off and
then back on. This often clears the service message indicator, and printer
operation resumes. Always try this before making a service call.
Service calls should be placed to the vendor from whom you purchased the
printer. If you cannot get service from your vendor, see the Service & Support
Guide for additional contact information.
This service
message...
CALL FOR SERVICE
< X >
104
means...
An error has been
detected with the item
indicated < X > in the
service message.
Status, Error, and Service Messages
do this...
Reboot the printer. This
often clears the service
message indicator, and
printer operation can
resume. If the condition
persists, contact your
local vendor or check
the Service & Support
Guide for information on
MINOLTA-QMS-
authorized service
providers.