Minolta MAGICOLOR 3100 User Manual page 56

5
Load the postcard media
printing-side down in the
multipurpose tray.
6
Adjust the media guides to the
width of the postcards.
7
Print the postcards.
How do I load and print thick stock?
Attention
Do not mix thick stock with any other media in the same tray, as this will
cause printer jamming.
5 "
Most thick stock printing is supported from any inputbin. However,
media type "Thick 3" can be printed only from the multipurpose tray.
1
In the printer driver (Paper tab, Media Type option), select Thick 1
(76–99 g/m
2
Remove any media in the media tray.
3
Load the new media.
4
Slide the media tray back into the printer.
5
Print the thick stock.
How do I load and print transparencies?
Attention
Use only transparency media approved for this printer. Check
www.minolta-qms.com/support (click on Answer Base) for currently
approved media. To order approved media, go to www.q-shop.com.
1
In the printer driver (Paper tab, Media Type option), select Transparency
and (Paper tab, Paper Size option), select either Letter or A4.
2
For transparencies, select the size of transparency, either
a
For the multipurpose tray, press the MP Size
required transparency size and select it, or
50
2
), Glossy Thick 1 (76–99 g/m
2
) or Thick 2 (100–159 g/m
key and scroll to the
Loading Media
2
).