Minolta MAGICOLOR 3100 User Manual page 104

This message...
CANCEL <N>
CANCELLING JOB
CMM ERROR < X >
CREATED FILE
CREATING
XXXXXXXXXXXX
FILE, WAIT...
ADC SENSOR
DUSTINESS <X>
98
means...
One or more of the
print jobs < N > in the
print queue are being
canceled.
The Cancel key has
been pressed, and
the print job in the
print queue is being
canceled.
The color profile
requested is not on
the printer.
The accounting file
has been created.
The specified
accounting file is
created when
accounting is enabled
and the files are not
in existence or these
files are created
following a Reset
Accounting
(XXXXXXXXXXXX
represents the Job
Accounting or Paper
Accounting file).
The Automatic
Density Control
(ADC) sensor is dusty
and an error or
warning has been
indicated.
Status, Error, and Service Messages
do this...
Press Select for all
jobs with a printing,
interpreting, spooled,
or terminating status to
be completely removed
from the system.
Press Select and the job
in the print queue will be
canceled.
Install the correct CMM
profile or request
another CMM profile
from the application.
No action needed.
Wait. No other action
needed.
Clean the density
sensor. See "How do I
clean the density
sensor?" on page 60.