Table of Contents
Advertisement
WARNING!
Do not spill water or detergent into the printer; otherwise the printer will
be damaged and an electric shock may occur.
ACHTUNG! Verchütten Sie kein Wasser oder andere Flüssigkeiten auf
dem Drucker, da das Gerät sonst beschädigt wird oder die Gefahr eines
elektrischen Schlages besteht.
„
Never spray cleaning solution directly on the printer's surface; the spray
could penetrate through the air vents of the printer and damage the
internal circuits.
„
Be careful when cleaning the inside or removing paper jams, as the fuser
assembly and other internal parts become very hot. Open the front cover,
and let the interior of the printer cool before handling the inside of the
printer.
„
Read all caution and warning labels carefully, making sure to follow any
instructions contained in them. These labels are located on the printer's
interior.
For printer storing and shipping instructions, refer to www.minolta-qms.com.
How do I clean the density sensor?
The printer's transfer roller contains a density sensor to detect the density of
media passing by. When the sensor gets dirty or dusty, print quality will
degrade. When that happens
1
Turn off the printer.
60
Cleaning
Advertisement
Chapters
Table of Contents
Troubleshooting
