Minolta MAGICOLOR 3100 User Manual page 63

WARNING!
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor. Material Safety Data Sheets (MSDS) information
can be found at www.minolta-qms.com (click on the Answer Base).
ACHTUNG! Sollte Toner in Ihre Augen gelangen, die Augen unbedingt
sofort mit kaltem Wasser ausspülen und einen Artzt aufsuchen.
MSDS-Informationen (Material Safety Data Sheets; Datenblätter zur
Materialsicherheit) finden Sie im Internet unter www.minolta-qms.com
(klicken Sie auf "Answer Base").
„
Lift the printer from the bottom only, using the carrying grips. Make sure
that two people are available to lift the printer when moving it.
„
Do not place anything on the top of the printer.
„
Do not open any cover of the printer during printing.
„
Always close the printer covers gently. Never expose the printer to
vibrations.
„
Do not leave the printer's covers open for any length of time, especially in
well-lit places; light may damage the imaging unit.
Attention
The OPCs in the imaging unit are extremely sensitive to bright light,
direct sunlight, and touch. Always leave the imaging unit in its
protective box until you're ready to install it. Any exposure to light
should be limited to less than two minutes, or permanent damage
could result. Handle the unit carefully so you don't touch the black
surface of the transfer roller.
„
Do not cover the printer immediately after using it. Turn it off and wait until
it cools down.
When the front cover is opened, the fuser temperature drops gradually
(one hour wait time).
Introduction
57