How Do I Replace The Media Feed Roller(S) - Minolta MAGICOLOR 3100 User Manual

How do I replace the media feed roller(s)?

The media feed rollers feed media from the
media tray(s) into the printer. When the media
feed rollers deteriorate, media may not feed
correctly from the media tray, resulting in media
jams. Replace the media feed roller in each
500-sheet media tray each time you replace the
fuser unit.
Three media feed rollers are included with the
fuser unit. If you do not have a high-capacity
input feeder (HCIF), two of the rollers do not
need to be installed.
1
Pull the media tray out of the printer
until it stops.
2
Hold the tray with both hands, lifting slightly, and remove it from the
printer.
Push the tabs of the media feed roller cover to open the cover.
10 Replacing the Fuser Unit