Minolta MAGICOLOR 3100 User Manual page 80

2
Pull out the jammed media in the
tray(s).
3
Open the front cover (button A) c, d.
4
Check for any media scraps inside the
printer.
5
Close the front cover.
6
Reinsert the media in the tray.
Even up the front edges of the media
currently in the tray.
Ensure that the media is lying flat in
the tray(s).
Make sure the media doesn't exceed
the media limit mark. Check to see if
the media width guides are correct.
7
Slide the tray(s) back into the printer.
Output Tray Jams
Remove jammed media from the output tray by gently pulling it toward you. If,
after clearing the media jam, the jam message in the control panel window
persists, open and close the front cover. This should clear the jam message.
74
2
Clearing Media Jams
1
A