Table of Contents
Advertisement
Working with the printer
Cancelling a print job
You can cancel a print job that is currently being processed.
1
While data is being processed or printed (the green "Ready" indicator
is blinking), hold down the panel button for more than 5 seconds.
2
Release the panel button after both indicators light up.
The current print job has now been cancelled.
6.3
Loading media
Loading media into Tray 1
Note the following points:
Refill the tray only when it is completely empty.
Refer to the advice on loading media on page 6-1.
1
Fold Tray 1 down flat.
2
Squeeze the right media guide and
open the media guides.
3
Place the media in the tray.
How many sheets may I place
?
on the tray?
Tray 1 has a capacity of 150
sheets of plain paper. The stack
of paper should not rise above
the media limit mark.
How is letterhead fed in?
?
Load letterhead with the side to
be printed facing up and the
preprinted letterhead at the top (facing the printer).
6
6-5
Advertisement
Table of Contents
