Setting Page Count Tx - Minolta Di151 Operator's Manual

Using the Enhanced Utilities (2)
2. Press "2" of Numeric keys. Then the
following message appears briefly to confirm
your selection.
3. Press or
resolution as default setting (Standard /Fine
/Super Fine /Half Tone)and then press Yes
key.
If you select "H/F" then the message
appears to ask the quality of Half tone,
PRESS or
setting, then press the Yes key to accept
this selection.
4. Press No/Clear key, back to the initial state.

7.3.3 Setting PAGE COUNT TX

When Page Count TX is setting to ON, before the transmission the original documents
are scanned into memory and judged whether the pages is correct or not. This function is
used to ensure the original documents not misfed in Document Feeding Tray.
1.Press the Utility key 4 times then the display
appears the message "TX OPERATION".
2. Press "3" of Numeric keys. Then the following
message appears briefly to confirm your
selection.
3. Press or
default setting and press Yes
key.
key to select the desired
key to select the desired
key to select ON or OFF as
Yes
7-18
ABC
2
2 RESOLUTION
*STD F S/F
, & YES
*STD FINE
, & YES
No
C
Utility
TX OPERATION?
OK=YES / or 1-7
DEF
3
3 PAGE COUNT TX
*ON
, & YES
H/T
S/F
x 4
OFF