Resetting The Maintenance Code Display; Details Of Maintenance Codes; Entering The Tech. Rep. Mode - Minolta Di450 Service Manual

6.

RESETTING THE MAINTENANCE CODE DISPLAY

6-1.

Details of Maintenance Codes

Code
The count of "Waste Toner" of the Consumables counter reaches a predeter-
M2
mined value before the setting value.
M3 The count of "Web" of the Consumables counter reaches the setting value.
6-2. Resetting the Maintenance Code Display
(1)

Entering the Tech. Rep. Mode

<Procedure>
1. Press the Utility key.
2. Touch Meter Count.
3. Press the following keys in this order: Stop
4. Select Tech. Rep. Mode.
(2) Resetting the Maintenance Code Display
• M2: Waste Toner
<Resetting procedure>
1. Enter the Tech. Rep. mode.
2. Select "Counter."
3. Select "Consumables."
4. Select the count of Waste Toner.
5. Press the Clear key.
• M3: Web
<Resetting procedure>
1. Enter the Tech. Rep. mode.
2. Select "Counter."
3. Select "Consumables."
4. Select the count of Web.
5. Press the Clear key.
Description
0 0 Stop
T-79
0 1.