Table of Contents
Advertisement
Menu Item
ACPI Standby State
USB Keyboard Wakeup
From S3
Power
Management/APM
Suspend Time Out
(Minutes)
Power Button Function
Restore on AC/Power
Loss
Resume on Ring
Resume on LAN
Resume on RTC Alarm
RTC Alarm Date
RTC Alarm Hour
2-14 System Configuration
Advanced Menu - Power Management Setup
Settings (default is bold)
S1/POS, S3/STR
Select S1/POS for a low wake-up latency sleeping state. In the
S3/STR mode, the CPU, cache, and chipset contexts are lost.
Disabled, Enabled
Select Enabled to allow the system to wake up from a keyboard
input.
Enabled, Disabled
Select Enabled to enable Power Management and Advanced
Power Management (APM).
Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60
Specifies the length of time of system inactivity while in Standby
state before entering Suspend power state.
Suspend, On/Off
Suspend sets the power switch for Suspend (Sleep) mode. With
power on, pressing the switch once places the system in sleep
mode. Pressing and holding the switch in for 4 seconds or more
turns power off.
Last State, Power Off, Power On
The Power On setting automatically turns power on after a power
loss. The Power Off setting requires the user to restart the system
with the power button. The Last State setting restores the system
to the state where it was on power loss.
Disabled, Enabled
The Enabled setting automatically reboots the system when a
signal is sent through a modem.
Disabled, Enabled
The Enabled setting automatically reboots the system when a
signal is sent through a LAN.
Disabled, Enabled
When Enabled, you can choose the time the system boots up (see
the following time settings).
15, Every Date
Sets the day that the system boots up (when Resume on RTC
Alarm is Enabled).
12, 1-00
Sets real time clock alarm hour (when Resume on RTC Alarm is
Enabled).
Advertisement
Table of Contents
