NEC POWERMATE VE - SERVICE MANUAL 05-1996 Service Manual page 142

5. Reinstall the system cover.
6. Connect system power cables and external options.
Turn on the system. The system boots up and clears the password.
7.
Turn off the system and unplug the system and any connected peripherals.
8.
9. Remove the system cover.
10. Remove the jumper from the Password Clear jumper block.
11. Reinstall any removed expansion boards.
Reinstall the system cover.
12.
Connect and power up the system and any removed peripherals.
13.
14. Rerun Setup to set a new password (see Section 2, Setup and Operation).
System Board Jumpers B-5