Numlock - NEC POWERMATE VE - SERVICE MANUAL 05-1996 Service Manual

Use the legend keys to make the selections and exit to the Main Menu. Use Table Section
2-5 to select the boot options.
Parameters
Summary Screen
Floppy Check
Last Boot Fail

Numlock

Select "Numlock" directly from the Main Menu summary window to display the Keyboard
Features menu.
Use the legend keys to make the selections and exit to the Main Menu. Use Table Section
2-6 to configure the keyboard parameters.
Parameters
Numlock
Keyboard Auto-
Repeat rate
Keyboard Auto-
Repeat delay
Key Click
Table Section 2-5 Boot Parameters
Options
Enabled (default)
Disabled
Enabled (default)
Disabled
3 (default)
User-selectable settings
Disabled
Table Section 2-6 Numlock Parameters
Options
Auto (default)
On
Off
Fast (default)
Medium
Slow
1/4 sec
1/2 sec (default)
3/4 sec
1 sec
Enabled
Disabled (default)
Setup and Operation
Description
Displays system configuration at the end of boot-
up.
Verifies diskette type during boot-up. Disabling
speeds up boot time.
Sets the number of times for user to boot system.
If system fails to boot on number of tries, the
"Previous Boot Incomplete" message appears and
the system boots with default settings.
The default setting, 3, give the user three tries to
boot the system before the "Previous Boot
Incomplete" message" appears.
Description
On or Off turns NumLock on or off at bootup. Auto
turns NumLock on if it finds a numeric key pad.
Sets the delay time after the key is held down
before it begins to repeat the keystroke.
Turns audible key click on or off.
2-15