Desktop Blank Panel Removal; Desktop Front Panel Removal - NEC PowerMate VP75 User Manual

3-26 Options

Desktop Blank Panel Removal

Remove the blank panel from the desktop chassis as follows.
1. Remove the desktop cover and 3 1/2-inch diskette drive bracket as previously
described.
2. Unplug the following cables from their connectors.
n
Power lamp
n
Hard disk drive busy lamp
n
Suspend button
3. Remove the five front panel screws (see Figure Section 3-21).
4. Pull the lamp and suspend cables through the hole in the front of the system unit chassis
when removing the front panel assembly.
Figure Section 3-21 Desktop Front Panel Removal