Appendix B System Board Jumpers; Jumper Locations - NEC POWERMATE VE - SERVICE MANUAL 05-1996 Service Manual

Appendix B
System Board Jumpers
This appendix provides jumper setting information for configuring the system for a
particular system requirement. Situations that require changing the jumper settings include
the following:
n
upgrading the processor
n
clearing a password

JUMPER LOCATIONS

Figure Appendix B-1 shows the location of the system board jumpers.
1
2
3
JP5 JP4 JP7 JP3
Figure Appendix B-1 System Board Jumper Locations
CAUTION: Jumpers are set correctly at the
factory for the shipped configuration. If the
system requires a jumper change, change only
the jumper setting for that condition. Otherwise,
keep the jumpers at their factory settings.
L2 SRAM
VRE/VR
Cache
1
2
3
BF0
BF1
BF1
1
2
CLR PASSWD
3