1/2-Inch Hard Disk Drive Removal; Inch Hard Disk Drive Cables - NEC POWERMATE PRO2180 - SERVICE MANUAL 1996 Service Manual

5-10 Repair

3 1/2-inch Hard Disk Drive Removal

Remove the 3 1/2-inch hard disk drive as follows.
1. Remove the system unit cover as previously described (see "System Unit Cover
Removal").
2. Unplug the hard disk drive power and signal cables from the hard disk drive (see
Figure Section 5-12).
Figure Section 5-12 3 1/2-Inch Hard Disk Drive Cables
NOTE: When reinstalling the drives, note that
all power cables are keyed to fit only in the
correct position.