System Configuration; Nec Utilities And Drivers; Setup Utility - NEC POWERMATE P - SERVICE MANUAL 1995 Service And Reference Manual

2-6 Setup and Operation

SYSTEM CONFIGURATION

This section describes the Setup utility program that allows the system configuration
information to be viewed and changed.
System configuration information is stored in nonvolatile memory. Nonvolatile memory in
the system is a complementary metal-oxide semiconductor (CMOS) chip backed by a
battery, either a coin-type battery or a real-time clock/battery module on the system board.
The battery supplies continuous power to the CMOS memory and maintains configuration
information when system power is off.

NEC UTILITIES AND DRIVERS

Click on a topic for information about using NEC utilities and drivers.
n

Setup Utility

n
Flash Utility
n
Video Drivers
n
NEC Backup Utility
n
Desktop Management Interface
Setup Utility
The Setup utility program allows you to enter system configuration information and control
special features of the system.
NOTE: The system ships from the factory with
the correct system parameters for the
configuration. Unless setting the time and date,
setting security features, customizing the system,
or adding optional hardware, Setup does not
need to be run.
NOTE: Your system ships from the factory with
the correct system parameters for your
configuration. Unless you add optional hardware,
you do not need to run Setup to operate your
system. However, you might wish to run the
Setup utility to set features that customize your
system, such as security features.