Icom IC-7760 Advanced Manual page 96

10
CLOCK AND TIMERS (ADVANCED)
NTP function
The Network Time Protocol (NTP) function
synchronizes the internal clock of the IC-7760 with a
time management server.
L To use this function, an Internet connection and default
gateway settings are necessary.
D Manually synchronizing the internal
clock
Using this function, you can manually synchronize
the internal clock by accessing a time management
server.
1. Open the DATE/TIME screen.
» SET > Time Set > Date/Time
MENU
2. Touch "<<NTP TIME SYNC>>."
• "NTP Time Sync. Please wait..." is displayed.
• The transceiver starts accessing the NTP server
address that is set in "NTP Server Address."
3. When "Time Sync completed." is displayed, touch
[OK].
4. To close the DATE/TIME screen, push
several times.
D Using the NTP function
By turning ON the NTP function, the transceiver
automatically synchronizes the internal clock with the
time management server.
L This function is set to ON by default.
1. Open the DATE/TIME screen.
MENU
2. Touch "NTP Function."
3. Select ON or OFF.
• When ON is selected, the transceiver starts
4. To close the DATE/TIME screen, push
several times.
EXIT
10-2
» SET > Time Set > Date/Time
accessing the NTP server address that is set in "NTP
Server Address."
EXIT