Icom IC-7760 Advanced Manual page 85

7
MEMORY OPERATION
Memo Pad
There are 5 Memo Pads as the default to save
frequencies and operating modes for easy writing and
recall. You can increase the Memo Pads to 10 in the
following item.
» SET > Function > Memo Pad Quantity
MENU
L The Memo Pads are separate from Memory channels.
Memo Pads are convenient when you want to
temporarily memorize a frequency and operating
mode, such as when you find a DX station in a pile-
up, or when the desired station is busy for a long time
and you want to temporarily look for other stations.
D Saving the contents into a Memo Pad
1. Select the Main band or Sub band.
2. Select the VFO mode.
3. Set the frequency and operating mode, then push
for 1 second.
MPAD
L When you save up to the set number of Memo Pads
in "Memo Pad Quantity," the oldest Memo Pad is
automatically cleared for the new Memo Pad.
NOTE: Each Memo Pad must have its own unique
contents. The Memo Pads with identical content
cannot be saved.
D Calling up the Memo Pads
1. Select the VFO mode.
2. Push several times until the desired Pad is
MPAD
displayed.
L Pushing selects the Memo Pads.
MPAD
L The most recently saved Memo Pad is selected first.
D MEMO PAD screen
The MEMO PAD screen displays the saved contents
in a list, in which you can select or delete the saved
contents.
» MPAD
MENU
TIP: If you change the frequency or operating
mode called up from Memo Pads, the contents are
automatically updated in a temporary Pad.
Key
▲/▼ Scrolls through the list.
Touch for
DEL
1 second
Touch for
DEL ALL
1 second
Select to display the MEMO PAD list in the
EXPAND
Expanded or Normal screen.
7-7
Temporary Pad
Action
Deletes the selected Memo Pad.
Deletes all the Memo Pads.