Icom IC-7760 Advanced Manual page 67

5
VOICE RECORDER FUNCTIONS
Recording a QSO audio
This transceiver is equipped with a QSO recorder not
only for the receive audio but also for the transmit
audio.
This function is useful to make a QSO record, or
to confirm your QSO with a rare entity's station, or
on a DX'pedition. You can also use the function to
repeatedly transmit the same voice message.
The recorded contents are saved onto an SD card.
There are 3 ways to start recording.
z Hold down for 1 second.
REC
z Push and touch "<<REC Start>>."
QUICK
z Push and touch [RECORD].
MENU
MENU QUICK REC
L The recorded audio is saved in the "Voice" folder on the
SD card.
L When "PTT Auto REC" is set to ON, the recording
automatically starts when you start transmitting.
» RECORD > Recorder Set > PTT Auto REC
MENU
TIP: About the icons
• While recording, "z" is displayed under the
clock readout and the SD card indicator
next to the SD card slot blinks blue.
• While pausing, "〓" is displayed.
NOTE:
• To record a QSO, an SD card (user supplied) is
required.
• DO NOT remove the SD card from the transceiver while
recording. Otherwise, the recording stops, and the card
data may be corrupted or deleted.
• Once the recording starts, it pauses and resumes if the
transceiver is turned OFF and ON again.
• The recording continues until you touch <<REC Stop>>,
or the free space on the SD card has run out.
• When the recording file's size becomes 2 GB, the
transceiver continues to record, but to a new file.
D Using the [REC] screen
z Hold down
REC
• Starts recording.
• "Recording started." is briefly displayed.
L To stop recording, hold down
again.
D Using the QUICK MENU screen
1. Push .
QUICK
• Opens the QUICK MENU screen.
2. Touch "<<REC Start>>."
• Starts recording.
• "Recording started." is briefly displayed.
L To stop recording, open the QUICK MENU screen
again and touch "<<REC Stop>>."
D Using the MENU screen
1. Open the QSO RECORDER screen.
» RECORD
MENU
2. Touch "<<REC Start>>."
• Starts recording.
• "Recording started." is briefly displayed.
L To stop recording, touch "<<REC Stop>>."
3. To close the QSO RECORDER screen, push
.
EXIT
5-2
for 1 second.
for 1 second
REC