Icom IC-7760 Advanced Manual page 41

2
ADVANCED OPERATIONS
FM repeater operation
D Setting the repeater tone frequency
Most repeaters require a subaudible tone to be
accessed. Subaudible tones are superimposed on
your signal, and must be set in advance.
Do the following steps to set the tone frequency.
1. Select the FM mode.
2. Touch [TONE] for 1 second.
3. Rotate to set the desired subaudible
MAIN DIAL
tone frequency.
Selectable tone frequencies
67.0 88.5 114.8
69.3 91.5 118.8
71.9 94.8 123.0
74.4 97.4 127.3
77.0 100.0 131.8
79.7 103.5 136.5
82.5 107.2 141.3
85.4 110.9 146.2
You can reset to the default setting
by touching this key for 1 second.
151.4 177.3 203.5
156.7 179.9 206.5
159.8 183.5 210.7
162.2 186.2 218.1
165.5 189.9 225.7
167.9 192.8 229.1
171.3 196.6 233.6
173.8 199.5 241.8
Checking the repeater tone frequency
You can check the tone frequency by receiving the
repeater's input frequency using the tone scan. To
receive the input signals, the transceiver detects
the subaudible tone frequency using the tone scan
function.
1. Touch [T-SCAN].
• The scan starts, and then stops when the matching
tone frequency from the repeater is received.
2. To close the TONE FREQUENCY screen, push
EXIT
250.3
254.1
2-31
Blinks while scanning
.