Icom IC-7760 Advanced Manual page 84

7
MEMORY OPERATION
Clearing a Memory channel
You can clear a no-longer-used Memory channel and
reset it as a blank channel, except for the program
channels (P1 and P2).
1. Select the Main band or Sub band.
2. Select the Memory mode.
3. Confirm the function indicator for
"M-CH."
4. Rotate to select the channel to be
MULTI
cleared. (Example: channel 3)
5. Touch [M-CLR] for 1 second.
6. To close the VFO/MEMORY screen, push
displays
MULTI
The memory channel to clear
Cleared
MEMORY screen
» MEMORY
MENU
You can edit Memory channel contents on the
MEMORY screen.
1
Confirm
1 Memory channel number
Displays the Memory channel number (1 ~ 99, P1,
P2).
L P1 and P2 cannot be left blank.
Memory select icon
z Touch this icon to set the Select number "★1,"
"★2," "★3," or OFF.
L See page 8-5 for the Select Memory scan.
z Touch the icon for 1 second to display the
SELECT ALL CLEAR screen, and then select the
desired item to reset the Select number.
2 Frequency/Operating mode/IF filter
Displays the entered frequency, selected operating
mode, and the IF filter.
3 Memory channel name
Displays the memory channel name, if entered.
L See page 7-5 for details.
4 Memory menu
Touch to display the MEMORY MENU screen.
L You can select "Edit Name," "Memory Write," or
"Memory Clear."
5 [▲] and [▼]
Touch to scroll through the Memory channels, 6
channels at a time.
TIP: About the QUICK MENU screen
While selecting a Memory channel with memory
contents, push
screen. You can select SELECT, Edit Name, Memory
Write, Memory Clear, or SELECT All Clear.
.
EXIT
7-6
2 3
to open the QUICK MENU
QUICK
4
5