Icom IC-7760 Advanced Manual page 77

6
VOICE TX MEMORY FUNCTION
Transmitting a Voice TX memory content
You can transmit the Voice TX memory contents once,
or repeatedly. This is useful for transmitting your call
sign or name in some contests, or repeatedly calling
CQ.
D Transmitting
Transmits the prerecorded content. (p. 6-2)
1. Display the VOICE TX screen.
» VOICE
MENU
2. Touch the desired Voice memory key [T1] ~ [T8].
The transmission's remaining time
• Transmits the recorded content once.
3. To close the VOICE TX screen, push
When a USB keyboard is connected:
You can transmit the preset contents in the Voice TX
memory (T1 ~ T8) from a keyboard by setting "Keyboard
[F1]-[F8] (VOICE)."
L To repeatedly transmit the recorded contents, push [F1]
~ [F8] while holding down [Shift].
» SET > Connectors > Keyboard/Mouse
MENU
When an external keypad is connected:
You can transmit the preset contents in the Voice
TX memory (T1 ~ T8) from an external device by
setting the "External Keypad," and then connecting
an external keypad to [EXT-KEYPAD] or [MIC] on
the controller.
» SET > Connectors > External Keypad
MENU
D Repeatedly transmitting
1. Display the VOICE TX screen.
2. Touch the desired Voice memory key [T1] ~ [T8]
for 1 second.
• Repeatedly transmits the recorded content.
L Information
• The recorded content is repeatedly transmitted for 10
• The Memory Timer counts down.
•
• You can set the pause interval between the repeated
.
EXIT
• After 10 minutes have passed, and all of the recorded
• When a signal is received in the interval between
3. To close the VOICE TX screen, push
TIP:
• If the "DATA OFF MOD" is set to "USB," "LINE-IN," "ACC,"
or "LAN," Voice TX memories can not be transmitted.
MENU
• To cancel transmitting the recorded audio by pushing
[PTT] on the microphone, set "PTT Port Function" to
"PTT Input."
MENU
6-4
» VOICE
MENU
Repeat icon The transmission's remaining time
minutes unless you manually stop transmission by
touching the selected memory.
is displayed while repeatedly transmitting.
transmissions in "Repeat Time" on the VOICE TX
SET screen. During this interval, the transceiver
returns to receive. (p. 6-5).
content in the memory is transmitted, the transceiver
automatically returns to receive.
transmissions, the transceiver pauses the next
transmission until the signal disappears. However, if
the squelch is set to open, the transceiver repeatedly
transmits after the repeat interval time expires, even
when signals are received.
»
SET > Connectors > MOD Input >
DATA OFF MOD
»
SET > Connectors > PTT Port Function
.
EXIT