Icom IC-7760 Advanced Manual page 34

2
ADVANCED OPERATIONS
Operating PSK
D Using the PSK Memory function
You can transmit the preset characters on the PSK
MEMORY screen.
Transmitting
1. Display the PSK DECODE screen in the PSK
mode.
» DECODE
MENU
2. Touch [TX MEM].
3. Touch an PSK memory between [PT1] and [PT8]
to transmit. (Example: PT1)
Transmitting
Transmitting contents are displayed.
• The TX status indicator lights red and the Po meter
swings.
L To cancel the transmission and to return to the PSK
DECODE screen, push
L After transmitting, automatically returns to receive.
Key
PT1 ~ PT8 Touch Sends the memory contents.
EDIT Displays the PSK MEMORY screen.
.
EXIT
Action
Preset memory contents
Memory Title
PT1 MYCALLx2 ↵ DE Icom Icom K ↵
PT2 MYCALLx3 ↵ DE Icom Icom Icom K ↵
PT3 QSLUR599 ↵ QSL UR 599 599 BK ↵
PT4 DE+UR599
PT5 73 GL SK ↵ 73 GL SK ↵
PT6 CQ CQ CQ
PT7 RIG&ANT
PT8 EQUIP.
When a USB keyboard is connected:
• You can transmit the preset contents in the PSK
memory (PT1 ~ PT8) from a keyboard by pushing
[F1] ~ [F8] on the USB keyboard.
After transmitting the contents, you can directly
enter a PSK message on the keyboard, and then
push [F12] to transmit.
To return to receive, push [F12] again.
• If the Auto TX/RX function is set to "OFF" or
"AUTO RX" (p. 2-25), you can display the preset
contents on the PSK DECODE screen, and then
transmit it by pushing [F12] on the keyboard.
• To scroll the decoded or transmitting contents,
push [Page Up] or [Page Down].
When an external keypad is connected:
You can transmit the preset contents in the PSK
memory (PT1 ~ PT8) from an external device by
setting "External Keypad," and then connecting an
external keypad to [EXT-KEYPAD] or [MIC] on the
controller.
» SET > Connectors > External Keypad
MENU
2-24
Preset characters by default
↵ QSL DE Icom Icom UR 599 599
BK ↵
↵ CQ CQ CQ DE Icom Icom Icom
K ↵
↵ My transceiver is IC–7760 &
Antenna is a 3–element triband
yagi. ↵
↵ My PSK equipment is internal
modulator & demodulator of the
IC–7760. ↵