Icom IC-7760 Advanced Manual page 14

2
ADVANCED OPERATIONS
Band Edge Beep
D Band Edge Beep
Inserting a Band Edge
You can insert a new Band Edge line, and enter new
band frequencies, between two entered band edges.
1. Open the "User Band Edge" screen.
2. Touch the band edge you want to insert a new
band edge above, for 1 second.
(Example: 1: 3.500.000 – 3.999.999 MHz)
L The new band edge will be inserted above the
selected band edge.
3. Touch "Insert."
4. Enter the lower band edge frequency then touch
[ENT]. (Example: 1.85)
Entry example: [1] [•] [8] [5] [ENT]
5. Enter the upper band edge frequency, then touch
[ENT]. (Example: 1.95)
Entry example: [•] [9] [5] [ENT]
• The entered band edge is saved, and returns to the
previous screen.
Resetting all band edges to their defaults
The steps below will reset all the band edges to their
initial settings. All entered settings will be deleted.
1. Open the "User Band Edge" screen.
2. Touch any band edge for 1 second.
3. Touch "Default."
4. Touch [YES].
• All the band edges reset to the initial settings.
2-4