Icom IC-7760 Advanced Manual page 80

7
MEMORY OPERATION
Memory channels
The Memory mode enables you to quickly select often-
used frequencies, modes, and other parameters. While
operating in the Memory mode, you can temporarily
change the operating frequency, mode, and so on,
without overwriting the Memory channel contents.
L To save the changed value, overwrite the Memory
channel contents, or copy to another Memory channel.
(p. 7-4)
Memory
channel
1 to 99 Regular Memory channels.
One frequency, one mode, one filter,
memory channel name, tone settings
(including tone frequencies for repeater
and tone squelch), and select memory scan
setting in each memory channel.
P1/P2 Scan Edge memory channels.
One frequency, and one mode and one filter
in each memory channel as scan edges for
programmed scans.
L They cannot be left blank.
Displayed
Entering Memory channel contents
NOTE: The new content you enter will overwrite any
content already in the selected memory.
1. Select the Main band or Sub band.
(Example: Main band)
2. Touch the VFO/MEMORY icon to open the VFO/
MEMORY screen.
L You can also select the mode by touching "VFO/
MEMORY" on the QUICK MENU screen.
3. Touch [VFO] to select the VFO mode.
4. Set the frequency, operating mode, and other
parameters.
5. Touch [MEMORY] to select the Memory mode,
and then rotate
in step 4.
6. Select the VFO mode again.
7. Touch [MW] for 1 second.
• The contents are entered in the selected Memory
channel.
L To enter another channel with the same operating
mode and settings, but on a different frequency,
repeat steps 4 ~ 7 after changing the frequency.
8. To close the VFO/MEMORY screen, push
To edit the Memory channel contents:
1. Select the Memory channel to edit.
2. Change the frequency and other parameters in
the Memory mode.
3. Open the VFO/MEMORY screen.
4. Touch [MW] for 1 second to overwrite onto the
selected Memory channel.
7-2
to enter the contents set
MULTI
Memory channel number
The channel is blank.
The entered contents
are displayed.
.
EXIT