Icom IC-7760 Advanced Manual page 25

2
ADVANCED OPERATIONS
Operating RTTY (FSK)
D Using the RTTY Memory function
Count-up trigger
The Count-up trigger enables the serial number to be
automatically increased after each complete serial
number exchange is sent. (Default: RT3, RT4)
is displayed on the RTTY memory set to the Count-up
L
trigger.
L You can change the Count-up trigger setting in the RTTY
001 menu. (p. 2-18)
Preset memory contents
Memory Title
RT1 MYCALLx2 ↵ DE ICOM ICOM K ↵
RT2 MYCALLx3 ↵ DE ICOM ICOM ICOM K ↵
RT3 QSLUR599 ↵ QSL UR 599 001 001 BK ↵
↵ QSL DE ICOM ICOM UR 599 001
RT4 DE+UR599
001 BK ↵
RT5 73 GL SK ↵ 73 GL SK ↵
↵ CQ CQ CQ DE ICOM ICOM
RT6 CQ CQ CQ
ICOM K ↵
↵ MY TRANSCEIVER IS IC–7760
RT7 RIG&ANT & ANTENNA IS A 3–ELEMENT
TRIBAND YAGI. ↵
↵ MY RTTY EQUIPMENT
IS INTERNAL FSK UNIT &
RT8 EQUIP.
DEMODULATOR OF THE IC–7760.
↵
L "001" is the contest number. You can insert or remove the
contest number on the RTTY MEMORY screen. The "*"
(asterisk) is the contest number. (p. 2-17)
Count-up trigger icon
Present number counter
Preset characters by default
When a USB keyboard is connected:
• You can transmit the preset contents in the RTTY
memory (RT1 ~ RT8) from a keyboard by pushing
[F1] ~ [F8] on the USB keyboard.
After transmitting the contents, you can directly
enter an RTTY message on the keyboard, and
then push [F12] to transmit.
To return to receive, push [F12] again.
• If the Auto TX/RX function is set to "OFF" or
"AUTO RX" (p. 2-16), you can display the preset
contents on the RTTY DECODE screen, and then
transmit it by pushing [F12] on the keyboard.
• To scroll the decoded or transmitting contents,
push [Page Up] or [Page Down].
When an external keypad is connected:
You can transmit the preset contents in the RTTY
memory (RT1 ~ RT8) from an external device by
setting "External Keypad," and then connecting an
external keypad to [EXT-KEYPAD] or [MIC] on the
controller.
» SET > Connectors > External Keypad
MENU
2-15