Icom IC-7760 Advanced Manual page 88

8
SCANS
SCAN screen
Display the SCAN screen.
» SCAN
MENU
L To select the VFO or Memory mode, touch [VFO] or
[MEMORY] on the VFO/MEMORY screen.
Key
PROG Starts or cancels a Programmed scan.
MEMO Starts or cancels a Memory scan.
Starts or cancels a ∂F scan.
∂F
While Programmed scanning, touch to switch
to the Fine Programmed scan.
While ∂F scanning, touch to switch to the
FINE
Fine ∂F scan.
L In the Memory mode, this key is displayed
when a ∂F scan is started.
Selects a ∂F span.
∂F SPAN • ±5 kHz, ±10 kHz, ±20 kHz, ±50 kHz,
±100 kHz, ±500 kHz, or ±1 MHz
Selects a Memory channel to set
Touch as a Select Memory channel.
SELECT
Touch for Displays the SELECT ALL CLEAR
1 second screen.
Selects the Select scan number for the Select
SEL No. Memory scan.
• "★1," "★2," "★3," or "★1,2,3"
Sets the operating frequency to
Touch for
RECALL the frequency that was set before
1 second
starting the scan in the VFO mode.
SET Displays the SCAN SET screen.
Main band: VFO mode
Main band: Memory mode
Action
• "★1," "★2," "★3," or "(no icon)"
SCAN SET screen
You can change the recorder settings on this screen.
1. Display the SCAN screen.
» SCAN
MENU
2. Touch [SET].
3. Touch the item to set. (Example: SCAN Speed)
4. Touch the option to set. (Example: Slow)
5. To close the SCAN SET screen, push
TIP: You can set each item to its default by touching
the item for 1 second, and then touching "Default" on
the QUICK MENU screen.
SCAN Speed
Sets the desired scan speed to slow or fast.
• Slow: Scan speed is slow.
• Fast: Scan speed is fast.
SCAN Resume
Sets the Scan Resume function to ON or OFF.
• OFF: When a signal is detected, cancels the scan.
• ON: When a signal is detected, the scan pauses
for 10 seconds, then resumes.
Two seconds after the signal disappears, the
scan resumes.
8-3
.
EXIT
(Default: Fast)
(Default: ON)