Icom IC-7760 Advanced Manual page 91

8
SCANS
Select Memory scan
D Select Memory scan operation
1. Select the Memory mode.
2. Display the SCAN screen.
» SCAN
MENU
3. Touch [MEMO] to start a regular Memory scan.
Blinks
4. While scanning, touch [SEL No.] to select the
Select Memory scan number. (Example: ★1)
L Touching [SEL No.] changes between "★1," "★2,"
"★3," and "★1,2,3."
Channels specified as ★1 are scanned.
★1:
Channels specified as ★2 are scanned.
★2:
Channels specified as ★3 are scanned.
★3:
★1,2,3: Channels specified as ★1, ★2, or ★3 are
scanned.
★1 is selected.
5. Touch [SELECT] to switch to the Select Memory
scan.
L Information
• When a signal is detected, the scan pauses according
to the "SCAN Resume" setting, and then resumes.
• To return to the regular Memory scan, touch [SELECT].
• While scanning, touch [SEL No.] to select the Select
Memory scan number.
• To cancel the scan, touch [MEMO].
6. To close the SCAN screen, push
Clearing all Select Memory channels
1. Touch [SELECT] for 1 second on the SCAN
screen.
• The SELECT ALL CLEAR screen is displayed.
2. Touch the Select Memory channel number to
clear.
8-6
Blinks
EXIT
.