Attaching The Print Tray; Attaching The Auto Document Table; Attaching The Stop; Setting The Paper - Ricoh MV310 Operator's Manual

Attaching the Print Tray
APPENDIX A: INSTALLATION
Attaching the Print Tray
il Attach the print tray.
Attaching the Auto Document Table
cl
Insert the document table into the
holes on the top cover.
H
Slide the document table until you hear it clicks.
Attaching the Stop
El
Insert the stop by pushing it in di-
rection 1 as shown in the diagram.
When fully in, slide it towards di-
rection 2 to fix it in place.
Setting the Paper
See the section titled "Setting / Adding the paper". See page 80 .
141