Ricoh MV310 Operator's Manual page 120

Error Codes
Troubleshooting
1
Code
Possible Cause
1-01
Document length exceeded the maximum limit, or as for code 1-00
2-xx
Possible fault
in your machine
4-00
The page took too long to send. Send again at a lower resolution,or
without halftone.
The phone line may be bad.
4-01
There is a bad line.Your phoneline maybe disconnected.
4-02
The received page was too long.
4-1o
Other party may be using ID codes. Ask the other party to avoid ID codes.
5-20,5-21
Insufficient memory to receive the message. When the pages in memory
have been printed, ask the other party to resend.
5-25
Your machine has a problem,
6-01,6-02
Poor line condition or a problem with your machine
6-05,6-06
Poor line condition, or a problem with the fax machines
6-08
A problem with the machine at the other end
6-09,6-10
A problem with the machine at the other end or with yours machine
9-07
Copy jam at the cassette entrance (first, or top, paper feed station)
9-08
Copy jam inside the machine (first, or top, paper feed station)
9-09
Copy jam at the feed-out area
111