Ricoh MV310 Operator's Manual page 31

FAXING
Optional Feature for Transmission
m
Normally, the TTI programmed in your machine is printed at the top of each of
the pages you transmit when they are received at the other end. The top of the
image will be overprinted if there is no margin at the top of the transmitted
page.
In some cases, you may wish the other party to receive an unmarked copy of
your original. In this case, you can switch TTI off.
n
n
El
n
A
Press ~ until the right display ap-
SET OPTION
. y//"~
pears.
"1" T :[ F: R . 1 NT"?
If you wish to change the TTl set-
I!2ET ij!FT1i;!PJ y/4b
ting, press 4 or F until the dis-
[j pJ kI~I[~F
I
played setting is correct.
Yes when you have finished.
Document size
If you are going to send a page that is not of a normal size, your machine may
have trouble scanning the entire page. For example, if your page is larger than
a certain size but smaller than the next size up, you should use the document
size selection feature to select the larger size. Otherwise, your machine will not
scan the outer margins of your page. This feature is only available if you send
a document placed directly on the exposure glass, not with the auto document
feeder.
EI
Yes.
El
Select the scanning area using +
~[;-r ~!$IT~~~,~
""'{./ 4 b
and ~ key.
t+....-r~
M..TD L.12D
c1
A
Yes when you have finished.
22