Ricoh MV310 Operator's Manual page 67

OTHER FEATURES
Saving Energy
~ Thenight timer switches theheater offcompletely, buttheenergy saver can also
switch it to a midway temperature (see above).
If you wish to print a fax message while the heating element is off, you can
temporarily override the timer and print the message. Just press the Energy
Saver key. The timer will activate again automatically a few minutes after you
have printed your message.
As a typical example, you could program the heating element inside the printer
to stay off at night and over the weekend. (You can program different settings
for every day of the week.)
To use the Night Timer, you must:
1. Program the timers for each day of the week.
2. Switch the Night Timer feature on.
Setting the Timer (Function 77)
Caution: While the heating element is disabled, all incoming calls are re-
fused when the memory fills up.
Example: For Tuesday, set the Night Timer to switch the heater on at 9 am
and off at 6 pm.
El
El
El
c1 i
Press Function, 6 and enter ac-
cess code 2222. Then, press
7,1 and Yes.
Press Yes.
Use the ~ and ~ keys to scroll
through the days of the week.
Example: Press F twice to go to
Tuesday.
Press Yes.
58