Copying/Printing Using The Bypass - Ricoh MV310 Operator's Manual

Copying/Printing Using the Bypass COPYING
Copying/Printing Using the Bypass
Use the bypass feed table for the following types of copy paper.
0
a
Paper of a different size from those currently in the paper trays
Paper of non-standard size or weight, such as OHP transparencies, ad-
hesive labels, or postcard.
Load one sheet at at time onto the bypass feed table.
Caution: Do not put paper on the bypass
feed table while printing is in
progress. Wait for the page to finish printing before placing the next sheet.
Usage condition
Paper weight: 16 to 241b
Width: 4.0" to 10.1"
Length: 5.8" to 14.3"
How to Use the Bypass
Insert the sheet with the printing
side down. The edge should
touch the right side of the en-
trance. Then slide the guide of
the left side.
Make sure that the paper has ad-
vanced into the manual feeder.
Note: If
a paper is
left in the man-
ual feeder for 3 minutes, it will be
fed out automatically.
El
To enter the paper size, press ).
Note: If you do not enter the pa-
per size, the back side of next pa-
per might be dirty.
El
Press Yes.