Ricoh MV310 Operator's Manual page 124

Access Code for Functions 61 to 94
TECHNICAL REFERENCE
Access Code for Functions 61 to 94
Accessing functions 61 to 94 requires an access code.
The sole purpose of this feature is to keep others from accidentally
misadjusting the machine. This code cannot be changed, so do not rely on it as
a security feature.
The code is 2222
User Parameters (function 63)
Adjusting your machine sometimes requires that you change special settings
called user parameters. For each user parameter, you must change a bit in a
—
switch.
A switch has eight bits. Each bit has a vahe of 1 or O, and each bit is numbered
Oto 7 from the right. In the following example we'll change bit 3 of switch 05 in
the user parameters.
n
Press Function and 6, enter the
SETT I N13"?
y:4
access code 2222 then press
PRINT 1... I !3T <
6, 3, and Yes. You'll get:.
(You can press 4 to see a list.
Otherwise, press Yes.)
El
Press Yes again and use the 4 &
tp{+~jy~+
P keys to change switches. For
l; MITCt-1 Ma s l@@@ @@@:l
example go to switch 05
by press-
ing E a few times.
115