Ricoh MV310 Operator's Manual page 131

TECHNICAL REFERENCE Adjusting the Volume of Various Features
Adjusting the Volume of Various Features
(Function 92)
You can change the beeper (monitor) volume of the desired feature.
TFWN3 M13NITIX?
Beeps to signal transmissions.
I?EZV Mi:!hl1 Tl:$l Beeps to signal receptions.
Beeps to signal on hook dialing,
II
I:!IAL. FK!N:["I"C!R
Beeps when a number is dialed.
Beeps (doesn't buzz) to signal something going amiss.
ti:~{
Beeps when a key is pressed.
Press Function, 6, and enter the
access number 2222. Then press
9,2.
Press Yes.
Adjust the transmission monitor
volume with + & ~ and press Yes
when you're done.
Adjust the reception monitor vol-
ume with ~ & ~ and press Yes
when you're done.
Adjust the dial monitor volume
with 4 & P and press Yes when
you're done.
Adjust the buzzer volume with ~
& P and press Yes when you're
done.
Adjust the key press monitor vol-
ume with & and press Yes
when you're done.
Press Function to return to the ready state.
122