Ricoh MV310 Operator's Manual page 62

Rejecting Messages From Certain Senders
OTHER FEATURES
2 - You must turn Authorized Reception on (function 62). See page 56.
3 - You must set your machine to accept or reject messages from senders
in that list (user parameters, switch 08, bit 2 and 3; see page 56).
If you accept them, the general public will not have access to your fax machine.
You accept messages only from a group of people you know.
If you reject them, everyone will be able to send you messages except the
people in the list. This is useful to reject the junk fax mail.
You can store up to 30 identifications with this feature. You can program @ of
an identification and accept (or reject) messages from all senders whose
identification contains that part. See Wild Cards, page 150.
List of the Authorized Accept Result
Authorized Reception onfoff messages from
Senders (Function 62) special
(Function 81) terminals listed
or not listed
(Function 63)
Empty On Either No messagesare
accepted.
Empty/Not off Either All messagesare
empty
accepted.
Not empty On Listed Only messages
from special
terminalsare
accepted.
Not empty On non-listed All messagesare
accepted_
from special
terminals.
53