Table of Contents
Advertisement
Disdaved
Error Messages
Troubleshooting
FAXNONOTPROGRAMMED
There are no fax numbers stored in this Group.
NO
DATA PROGRAMMED
The Group that you tried to erase does not contain any fax
numbers.
ALREADY PROGRAMMED
Either:
This number is already included in this Group.
This RT1/CSl has already been stored for use with this
feature.
OVER NO OF PROG RT1/CSl
You cannot store any RTIsor CSISfor use with this
feature; the limit has already been reached.
RT1/CSl IS NOT PROGRAMMED
No RTIs or CSIS have been stored for this feature.
NO PAUSE
You must add a pause after your area code when you input
your fax terminal's own telephone number.
NOTCHANGEABLE
You cannot change the setting of this feature.
ADD TONER
The toner cartridge is empty. Install a new cartridge.
ADD PAPER
The indicated cassette is now empty.
COMMUNICATION
FAIL
There was an error during a transmission or reception.
Check the error report.
CLEAR ORIGINAL
A document is jammed in the feeder.
CLEAR COPY
Paper is jammed in the printer.
CLOSE COVER
A cover is not closed properly. Check that all covers are
closed.
UNABLE TO PRINT IN COMM.
You cannot print a report or make a copy while the
machine is sending or receiving a fax message.
UNABLE TO PROGRAM
This Quick Dial Key already contains a number. Try
another Quick Dial Key.
SERVICE CALL iii-%i$H
Machine is out of order. Contact with your service
...... :+:..... . .
representative.
109
Advertisement
Chapters
Table of Contents
