Ricoh MV310 Operator's Manual page 144

Attaching the Print Tray
APPENDIX A: INSTALLATION
Attaching the Print Tray
D
Attach the print tray.
Attaching the Auto Document Table
n
Insert the document table into the
holes on the top cover.
F1
Slide the document table until you hear it clicks.
Attaching the Stop
H
Insert the stop by pushing it in di-
rection 1 as shown in the diagram.
H
When fully in, slide it towards di-
rection 2 to fix it in place.
Setting the Paper
See the section titled "Setting /Adding the paper". See page 79.
135