Rejecting Messages From Certain Senders - Ricoh MV310 Operator's Manual

Rejecting Messages From Certain Senders OTHER FEATURES
Rejecting or Accepting Messages from Specified Senders
This feature is called Authorized Reception. It helps you reject junk fax mail.
It lets you specify which terminals you wish to receive fax messages from; all
others will be shut out.
1 - You must specify a list of senders (function 81). See page 54.
2 - You must turn Authorized Reception on (function 62). See page 56.
3 - You must set your machine to accept or reject messages from senders
in that list (user parameters, switch 08, bit 2 and 3; see page 56).
If you accepfthem, the general public will not have access to your fax machine.
You accept messages only from a group of people you know.
If you reject them, everyone will be able to send you messages except the
people in the list. This is useful to reject the junk fax mail.
You can store up to 30 identifications with this feature. You can program part of
an identification and accept (or reject) messages from all senders whose
identification contains that part. See Wild Cards, page 159.
List of the
Authorized Accept Result
Authorized
Reception on/off messages from
Senders (Function 62)
special
(Function 81) terminals listed
or not listed
(Function 63)
Empty On Either No messages are
accepted.
Empty/Not Off
Either All messages are
empty
accepted.
Not empty
On
Listed Only messages
from special
terminals are
accepted.
Not empty
On
non-listed All messages are
accepted except
from special
terminals.
53