Installing The Photoconductor, Toner Cassette And Cleaning Pad - Ricoh MV310 Operator's Manual

APPENDIX A: INSTALLATION
Toner Cassette and Cleaning Pad
Installing the Photoconductor,
Installing the Photoconductor,
Toner Cassette and Cleaning Pad
Before using the machine, install the photoconductor, toner cassette and the
cleaning pad as in the following procedure:
Open the upper unit and lift it until
it locks in place.
El
Open the side cover.
Put the photoconductor as shown
in the illustration. Pay attention to
the green knob are in both edge.
One of then is marked "R" for
rear (back) side. Then remove
the black sheets.
Caution: Never touch the photo-
conductor (green drum).
0
1
Turn the lever by gently pushing
it.
138