Copying - Ricoh Fax 680 MP Operator's Manual

COPYING

If you need to make a copy of something, and there is no copier available, use
your fax machine. Just place your original in the feeder, and press the Start /
Copy key.
Copying an original is a good way to test contrast and resolution before send-
ing a document if you are not sure that the settings that you have chosen are
appropriate. The copy made by your printer gives an indication of how the mes-
sage will look when received at the other end. If it does not look good, change
the resolution/contrast settings and try again.
1
Carefully place your original into the
document feeder.
2
Press the Copy key.
3
Either:
Make one copy:
Press the No key and go to Step
Make multiple copies:
Press the Yes key and go to Step
4
If you wish, change the number of cop-
ies using the ten keypad.
5
Press the Yes key.
6
Press the Start key.
7
The documents are stored in memory
while they are being scanned.
8
After the scanning is completed, coping
starts.
When copying has finished, the ma-
chine returns to standby mode.
Note: Maximum number of copies: 99 pages. The ADF (Automatic
Document Feeder) can stack up to 20 pages.
Do not copy originals smaller than 110mm wide and 105mm
long.
36
5($'<   
08/7,&23<"
$
&23<,1*
"
&23<  6(76 <
&23<  6(76 <
35(66
6725,1* 3 
08/7,&23<,1*
COPYING
<1
67$57