Printhead Cleaning - Intermec EasyCoder PF4i User Manual

Chapter 11—Maintenance

Printhead Cleaning

Cleaning the printhead on a regular basis is important for the life of the
printhead and for the printout quality. You should clean the printhead
each time you replace the media. This section describes how to clean
the printhead using cleaning cards. If additional cleaning is required, for
example removing adhesive residue from the platen roller or tear bar, use
a cotton swab moistened with isopropyl alcohol.
Isopropyl alcohol [(CH
fl ammable, moderately toxic, and mildly irritating sub-
stance.
1
Open the side door.
98
3
Intermec EasyCoder PF4i—User's Guide (Fingerprint version)
) CHOH; CAS 67-63-0] is a highly
2
2
Turn the printhead lift lever clockwise to
raise the printhead.