Media Supply Hub; 3-Inch Adapter; Label Taken Sensor; Real Time Clock - Intermec EasyCoder PF4i User Manual

Chapter 9—Options

Media Supply Hub

The rotating media supply hub is designed to fi t media roll cores with
an internal diameter of 38-40 mm (1.5 inch). The hub can be fi tted in
the same positions as the supply roll post, see Chapter 2. Being factory
installed, the position of the media supply hub is not intended to be
changed by the operator.

3-inch Adapter

The 3-inch/76 mm adapter is used with a rotating media supply hub and
makes it possible to use media rolls with 3 inch/76 mm inner diameter
cores. The adapter is pressed onto the hub and secured by a screw. Not
used with a media supply roll post.

Label Taken Sensor

The Label Taken Sensor (LTS) is a photoelectric sensor that enables the
printer's fi rmware to detect if the latest printed label, ticket, tag, etc. has
been removed before printing another copy.
The LTS can be enabled or disabled by means of the instructions LTS&
ON and LTS& OFF respectively in Intermec Fingerprint and the
Intermec Direct Protocol.
The LTS cannot be used in connection with a paper cutter.

Real Time Clock

The Real Time Clock circuit (RTC) relieves the operator or the host
from having to set the clock/calendar using the Intermec Fingerprint
instructions DATE$ and TIME$ after each power up. The RTC has its
own backup battery backup that will last 10 years or more.

CompactFlash Protection Plate

The protection plate encloses an inserted CompactFlash card and makes
it more diffi cult to steal. See Chapter 3 for illustration.
88 Intermec EasyCoder PF4i—User's Guide (Fingerprint version)