Side Doors And Megatop; Paper Cutter; Integral Liner Takeup Unit; Media Supply Hub - Intermec EasyCoder PF4i User Manual

Chapter 9—Options

Side Doors and Megatop

The EasyCoder PF4i Compact Industrial comes with two types of side
door. The standard long door encloses the entire media compartment
and allows a media roll with a diameter of 152 mm (6 inches). It also has
a slot for external media supply. The 8-inch Megatop has a hinged trans-
parent canopy that encloses a media roll with a diameter of up to 213
mm (8.38 inches).The standard long side door is generally illustrated
throughout this manual.

Paper Cutter

The paper cutter is a factory- or fi eld-installable option designed to cut
off continuous paper-based stock or liner between labels. The cut-off
labels, tickets, or tags can be collected on an optional tray. The paper
cutter can be controlled using the instructions CUT, CUT ON, and
CUT OFF in Intermec Fingerprint and the Intermec Direct Protocol.
Also see Chapter 4, "Media Load, Cut-Off."

Integral Liner Takeup Unit

The integral liner takeup unit is an optional device for peel-off (self-strip)
operation, which means the labels are separated from a liner (back-
ing paper) after printing and the liner is wound up on an internal hub.
The unit also includes a guide shaft. Peel-off cannot be combined with
Quick-Load guides, see below.

Media Supply Hub

The rotating media supply hub is designed to fi t media roll cores with
an internal diameter of 38-40 mm (1.5 inch). The hub can be fi tted in
the same positions as the supply roll post, see Chapter 2. Being factory
installed, the position of the media supply hub is not intended to be
changed by the operator.

3-inch Adapter

The 3-inch/76 mm adapter is used with a rotating media supply hub and
makes it possible to use media rolls with 3 inch/76 mm inner diameter
cores. The adapter is pressed onto the hub and secured by a screw. Not
used with a media supply roll post.
Intermec EasyCoder PF4i Compact Industrial—User's Guide (Fingerprint) 87